I recently got a new laptop at work. Its the Laptop of all laptops, a MackBook Pro 15inch.
We went for the top spec model with a 256GB SSD drive and the High Res AntiGlare Screen. Its really sweet kit.
The only problem is that the 256GB SSD isn’t quite enough for my as I have lots of Virtual Machines which require a lot of storage and I had a Crucial 256GB M4 SSD
drive spare from my old laptop.
I since discovered that you can add a second drive to the Macbook by removing the optical drive which allows space for a second disk. All you need is to purchase a Caddy which I got from Amazon for £25 or there is a one which comes with an external caddy for your optical drive which is around £55. Both of these drives are available here Drive Bay and Drive Bay with External Caddy.
Once delivered I had to get hold of a couple of small screwdrivers luckily a colleague had brought these in for me. (can’t remember the sizes but they are very small. One needs to be a torx)
Heres how to fit the kit…
The New Drive bay and my old drive.
First remove the 10 screws from the bottom plate. Careful not to round the heads. Once removed the metal base will pull off. This did require slight force as there are a couple of retaining grips that hold it to.
Locate the ribbon cable that crosses the drive and remove it from the board.
Remove the drive connector from the side of the superdrive.
Now remove the torn screws holding the drive in place.
Lift the cable out of the way
And remove the drive
The SATA interface in the drive bay does not perform as well as the HDD one so I recommend that you remove your existing Apple SSD and put that in your caddy and place your new SSD in the HDD bay.
Remove the existing drive.
Place the drive in the caddy
Put it all back together and Boot up your OS!
Speed test of the new drive shows its twice
APPLE SSD SPEED TEST…
and the Crucial 256GB M4 SSD …